Advertisement
Quick Links
X2
TM
QUICK
PROGRAMMING GUIDE
CONTROLS
Set Current Date
Set Current Time
Turn Dial to DATE/TIME
MANUAL WATERING
Run a Program
Turn Dial to RUN, Press and Hold Right Arrow
Run a Single Station
Turn Dial to MANUAL, Set RUN TIME,
Turn Dial to RUN
Circle = Velcro
ADD
WI-FI
PROGRAMMING OVERVIEW
①
Select a Program
Press PROGRAM (PRG) button to choose
program A, B, or C for setup
PRG
②
Set Watering Start Times
Turn Dial to START TIMES
③
Set Station Run Times
Turn Dial to RUN TIMES
④
Set Watering Days
Turn Dial to WATER DAYS
Dieline
https:/ /hunter.direct/WAND
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hunter X2-400
Summary of Contents for Hunter X2-400
- Page 1 Circle = Velcro QUICK PROGRAMMING GUIDE CONTROLS WI-FI https:/ /hunter.direct/WAND PROGRAMMING OVERVIEW ① Select a Program Press PROGRAM (PRG) button to choose program A, B, or C for setup Set Current Date Set Current Time Turn Dial to DATE/TIME ②...
- Page 2 One start time is needed to run the entire program. STATION LOCATION STATION RUN TIME STATION RUN TIME STATION RUN TIME https:/ /hunter.direct/X2help © 2019 Hunter Industries Inc. Hunter and the Hunter logo are trademarks of Hunter Industries, registered in the U.S. and other countries. RC-103-DC-X2-US 6/19...
Need help?
Do you have a question about the X2-400 and is the answer not in the manual?
Questions and answers
Wand how to install
The WAND module adds Wi-Fi and Bluetooth to the Hunter X2-400 controller. To install it:
1. Power off the X2-400 controller.
2. Open the controller cabinet.
3. Insert the WAND module into the designated port inside the controller.
4. Power the controller back on.
5. Use Bluetooth pairing on your smartphone to connect the controller to Wi-Fi.
6. Use the Hydrawise software for scheduling and remote access.
This allows for remote control, rapid programming, and water-saving features.
This answer is automatically generated