Hunter X-Core Owners Manual And Programming Instructions page 170

aCC/aGC loG messaGes .............................................................
The controller has 3 separate log files.
Each individual log has the date and time of the event at
the top of the screen.
Each type of log will show the most recent event first.
Use the + and – buttons to step through events, forward or
backward.
Alarm Log tracks all unusual events that require attention.
The Attention display (or "Fault", in earlier versions) that
appears when the dial is in the Run position will almost
always have one or more corresponding Alarm Log
entries, with more detail. Turn the dial to Data History and
select Alarm Log whenever an ATTENTION display occurs.
Controller Log tracks general changes or occurrences for
the controller. Most of these are not alarm events.
Station Log tracks all station activity, including normal
and abnormal activity. It can be used simply to verify
whether irrigation occurred, or used as part of the
diagnostic process.
AlArM lOG MeSSAGeS
Sensor State Change Sensor changed state (Closed/
Missed Irrigation
Power Outage
Power Restore
ADM Fault
Pump Fault
Station Fault
Pump Dec Failure
Sta Dec Failure
Sensor Decoder
84
Open)
A station missed irrigating
Controller or facepack power was
lost
Controller or facepack power was
restored
A fault was reported by ADM
A pump decoder reported a fault
A station decoder reported a fault
A pump decoder failed
A station decoder failed
A sensor decoder reported a fault
Alarm Log, Missed Irrigation "Mode" Labels
Mode appears when a station failed to complete irrigation
for some reason, and indicates why the station was
supposed be running in the first place.
Scheduled Station was running as part of an
automatic Field Controller Program (FCP)
(A, B, C, D, E, or F)
System Station was running as a System
Event Automatic Event
Manual Prg Station was running as part of a Manual
All All Stations Program
Custom Station was running as part of a Custom
Manual Manual Program
Manual Station was running as a Manual One
Station Station
SME Station was running as a System Manual
Event
MR Station was running as part of a
Program Manual All Stations program started by
Maintenance Radio
MR SSG Station was running as part of a SSG
started by MR
MR Station Station was running as a Manual One
Station started by MR
ICR Station was running as part of a Manual
Program All Stations program started by ICR
remote
ICR Station Station was running as a Manual One
Station started by ICR
ETS Progam Station was running as part of a Manual
All Stations started by ET System
ETS Station Station was running as a Manual One
Station started by ET System
Learn Event Station was running as part of the Learn
process
Test Event Station was running as part of the Test
program