Setting Event Day(S) Off; Automatic Watering; System Off; Programmable Rain Off - Hunter X-Core Owners Manual And Programming Instructions

proGrammING THE CoNTrollEr

setting Event Day(s) off

The X-Core allows you to program a No Water Day(s). This feature
is useful to inhibit watering on specific day(s). For example, if you
always mow the lawn on Saturdays, you would designate Saturday
as a no Water Day so that you are not mowing wet grass.
1. Turn the dial to the WAteR DAys position.
2. Enter an interval watering schedule as described on page 19.
button to scroll to the no Water Days at the bottom
3. Press the
of the display. MO will be flashing.
4. Use the button until the cursor is at the day of the week you
wish to set as a No Water Day.
5. Press the button to set this day as a no water day. The
illuminate over this day.
6. Repeat steps 4 and 5 until all desired event day(s) are off.
NoTE: you also have the option in the interval
watering schedule to program Odd or even days off.

automatic Watering

After programming the X-Core, set the dial to the RUn
position to enable automatic execution of all selected
watering programs and start times.
20

system off

Valves currently watering will be shut off after
the dial is turned to the systeM OFF position
for two seconds. All active programs are
discontinued and watering is stopped. To return
the controller to normal automatic operation,
simply return the dial to the RUn position.

programmable rain off

This feature permits the user to stop all
programmed waterings for a designated period
from 1 to 7 days. At the end of the programmed
rain off period, the controller will resume normal
will
automatic operation.
1. Turn the dial to the systeM OFF position.
Wait for OFF to be displayed.
2. Press the button as many times as
needed to set the number of days off
(up to 7 days).
3. Turn the dial back to the RUN position at
RUN which OFF, a number, the
will be displayed.
The days off remaining will decrease at midnight
each day. When it goes to zero, the display will
show normal time of day and normal irrigation
will resume at the next scheduled start time.
SYSTEM OFF
SYSTEM OFF
and icons
RUN