Setting Program Start Times; Eliminating A Program Start Time; Setting Station Run Times (Length Of Watering For Each Area); Setting Days To Water - Hunter X-Core Owners Manual And Programming Instructions

ProGraMMInG THe ConTroller (continued) ..............................................................

Setting Program Start Times

1. Turn the dial to the SET
PROGRAM START TIMES
position.
2. The factory preset is set on
program A. If necessary you
can select program B or C by
pressing the button.
3. Use the and buttons to change
the start time. (Advances in 15-minute
increments.) One start time will
activate all stations sequentially in
that program. This eliminates the need
to enter a start time for each station.
4. Press the button to add an
additional start time, or
the next program.
NOTE: Regardless of the order in which the start times
are entered, the Pro-C will always arrange the start
times in chronological order when the dial is moved off
the SET PROGRAM START TIMES position.

Eliminating a Program Start Time

With the dial set to the SET PROGRAM
START TIMES position, push the
and buttons until you reach
12:00 (Midnight). From this
am
position push the button once to
reach the OFF position.
SET PROGRAM START TIMES
button for
SET PROGRAM START TIMES
NOTE: If a program has all four start times turned off,
then that program is off (all other program details are
retained). Because there are no start times, there will
be no watering with that program.
Setting Station Run Times
1. Turn the dial to the SET STATION
RUN TIMES position.
2. The display will show the last
program selected (A, B, or C)
the station number selected, and
the run time for that station will be
flashing. You can switch to another
program by pressing the
3. Use the and buttons to change
the station run time on the display. You
may set station run times from 1 minute to 6 hours.
4. Press the button to advance to the next station.
5. Repeat steps 2 and 3 for each station.

Setting Days to Water

1. Turn the dial to the SET DAYS TO WATER position.
2. The display will show the last program selected (A, B, or C). You can
switch to another program by pressing the
3. The controller displays currently
programmed active day schedule
information. You can choose to water on
specific days of the week, or you can choose
interval watering, or choose to water on odd
days or even days. Each program can only
operate using one type of water day option.
SET STATION RUN TIMES
button.
button.
SET DAYS TO WATER
17