Standard Wiring - Salicru CV30 User Manual

(1) Locate the position of the installation hole.
(2) Fix the screw or nut on the located position.
(3) Put the inverter against the wall.
(4) Tighten up the screws.

3.2 Standard wiring

3.2.1 Connection diagram of main circuit
Note:
 The circuit breaker, braking resistor, input reactor, input filter and output filters are optional parts.
Please refer to Peripheral Optional Parts for detailed information.
 Remove the yellow warning labels of PB, (+) and (-) on the terminals before connecting the
braking resistor; otherwise poor connection may occur.
16 - 140
Figure 3-2 Installation
Figure 3-3 Connection diagram of main circuit
Installation Guidelines