Salicru CV30 User Manual page 68

Function
Name
code
FDT2 retention
P08.35
detection value
Frequency
P08.36 arrival
detection value
Energy Braking
P08.37
enable
Energy braking
P08.38 threshold
voltage
68 - 140
Detailed instruction of parameters
Setting range of P08.32 and P08.34: 0.00Hz~P00.03 (Max.
frequency)
Setting range of P08.33 and P08.35: 0.0~100.0% (FDT
electrical level)
When the output frequency is among the below or above
range of the set frequency, the multi-function digital output
terminal will output the signal of "frequency arrival", see the
diagram below for detailed information:
The setting range: 0.00Hz~P00.03 (the Max. frequency)
This parameter is used to control the internal braking unit.
0: Disabled
1: Enabled
Note: Only applied to internal braking unit.
After enabling P008.37, adjust the voltage appropriately to
brake the load. The factory default value changes with the
input rated voltage of the inverter.
The setting range: 200.0~2000.0V
In order to prevent user set a value too large, it is
recommended the following setting range
Default
Modify
value
5.0%
○
0.00Hz
○
0
○
220-230V
voltage:
380.0V
○
400V
voltage:
700.0V
Fault Tracking