Function
Name
code
Keypad setting
P03.12
torque
Torque reference
P03.13
filter time
Setting source
of forward
rotation
P03.14
upper-limit
frequency in
torque control
Setting source
of reverse
rotation
P03.15
upper-limit
frequency in
torque control
Torque control
forward
rotation
P03.16
upper-limit
frequency
keypad defined
value
Torque control
reverse
rotation
P03.17
upper-limit
frequency
keypad defined
value
Upper-limit
P03.18
setting of
Function Parameters
Detailed instruction of parameters
4: Analog AI3 setting torque
5: Pulse frequency HDI setting torque
6: Multi-step torque setting
7: MODBUS communication setting torque
8~10: Reserved
Note: Setting mode 2~7, 100% corresponds to 3 times of the
motor rated current
Setting range: -300.0%~300.0% (motor rated current)
0.000~10.000s
0: keypad setting upper-limit frequency (P03.16 sets P03.14,
P03.17 sets P03.15)
1: Analog AI1 setting upper-limit frequency
2: Analog AI2 setting upper-limit frequency
3: Analog AI3 setting upper-limit frequency
4: Pulse frequency HDI setting upper-limit frequency
5: Multi-step setting upper-limit frequency
6: MODBUS communication setting upper-limit frequency
7~9: Reserved
Note: setting method 1~9, 100% corresponds to the
maximum frequency
This function is used to set the upper limit of the frequency.
P03.16 sets the value of P03.14; P03.17 sets the value of
P03.15.
Setting range:0.00 Hz~P00.03 (the Max. output frequency)
This function code is used to select the electromotion and
braking torque upper-limit setting source selection.
Default
Modify
value
50.0%
○
0.100s
○
0
○
0
○
50.00
○
Hz
50.00
○
Hz
0
○
43 - 140