Salicru CV30 User Manual page 13

Below is the layout figure of the inverters three-phase 400V≥4 kW and three-phase 220V≥1.5 kW:
Figure 2-3 Product structure (3PH 400V≥4kW and 3PH 220V≥1.5kW
No.
1 External keypad port
2
3
4
5
Cover for the heat emission
6
7
8 Main circuit terminals
The cable entry of the main
9
10 Simple name plate
11
Product overview
Name
Cover
Keypad
Cooling fan
Name plate
hole
Control terminals
circuit
Bar code
Connect the external keypad
Protect the internal parts and components
Refer to the Keypad Operation Procedure
See Maintenance and Hardware Fault Diagnose for detailed information
See Product Overview for detailed information
Optional, enhancement of the protective degree. It is
necessary to derate the inverter because the internal
temperature is increasing (10% of derating)
See Electric Installation for detailed information
See Electric Installation for detailed information
Fix the cables
Refer to Type Designation Key
The same as the bar code on the name plate
Note: The bar code is on the middle part of the shell which is
under the cover
)
Illustration
13 - 140