Salicru CV30 User Manual page 76

Function
Name
code
selection
Multi-step
P10.02
speed 0
Running time
P10.03
of stage 0
Multi-step
P10.04
speed 1
Running time
P10.05
of stage 1
Multi-step
P10.06
speed 2
Running time
P10.07
of stage 2
Multi-step
P10.08
speed 3
Running time
P10.09
of stage 3
Multi-step
P10.10
speed 4
Running time
P10.11
of stage 4
Multi-step
P10.12
speed 5
Running time
P10.13
of stage 5
Multi-step
P10.14
speed 6
Running time
P10.15
of stage 6
Multi-step
P10.16
speed 7
Running time
P10.17
of stage 7
Multi-step
P10.18
speed 8
Running time
P10.19
of stage 8
76 - 140
Detailed instruction of parameters
frequency when power loss.
100.0% of the frequency setting corresponds to the Max.
Frequency P00.03.
When selecting simple PLC running, set P10.02~P10.33 to
define the running frequency and direction of all stages.
Note: The symbol of multi-step determines the running direction
of simple PLC. The negative value means reverse rotation.
Multi-step speeds are in the range of -f
be adjusted continuously
CV30 inverters can set 16 stages of speed, selected by the
combination of multi-step terminals 1~4, corresponding to
the speed 0 to speed 15.
When S1=S2=S3=S4=OFF, the frequency input manner is
selected via code P00.06 or P00.07. When all S1=S2=S3=S4
terminals aren't off, it runs at multi-step which takes precedence of
keypad, analog value, high-speed pulse, PLC, communication
frequency input. Select at most 16 stages of speed via the
~f and they can
max max
Default
Modify
value
○
0.0%
○
0.0s
○
0.0%
○
0.0s
○
0.0%
○
0.0s
○
0.0%
0.0s ○
0.0% ○
0.0s ○
0.0% ○
0.0s ○
0.0% ○
0.0s ○
○
0.0%
0.0s ○
0.0% ○
0.0s ○
Fault Tracking