3.2.2 Terminals figure of main circuit
Figure 3-5 3PH terminals of main circuit (220V≤0.75kW, and 400V≤2.2kW)
Figure 3-6 3PH terminals of main circuit (400V≥4 kW and 220V≥1.5kW)
Terminal
L, N
R, S, T
PB, (+)
(+), (-)
U, V, W
PE
Note:
Do not use asymmetrically constructed motor cables. If there is a symmetrically constructed
grounding conductor in the motor cable in addition to the conductive shield, connect the
grounding conductor to the grounding terminal at the inverter and motor ends.
Route the motor cable, input power cable and control cables separately.
Installation Guidelines
Figure 3-4 1PH terminals of main circuit (single-phase)
Single-phase AC input terminals which are generally connected with
the power supply.
Three-phase AC input terminals which are generally connected with
the power supply.
External dynamic braking resistor terminal
Input terminal for DC bus
Three-phase AC output terminals which are generally connected to
the motor.
Protective grounding terminal
Function
17 - 140