Structure Diagram - Salicru CV30 User Manual

2.6 Structure diagram

Below is the layout figure of the inverters single-phase 230V / three-phase 400V≤2.2KW and three-phase 220V≤0.75KW:
Figure 2-3 Product structure (1PH 230V-3PH 400V≤2.2kW and 3PH 220V≤0.75kW)
No.
1 External keypad port
2
3
4 Hole for the sliding cover
5
6
7 Potentiometer knob
8
9 Main circuit terminals
10
11
12
Note: In above figure, the screws at 4 and 10 are provided with packaging and specific installation depends
on the requirements of customers.
12 - 140
Name
Port cover
Cover
Trunking board
Name plate
Control terminals
Screw hole
Cooling fan
Fan cover
Connect the external keypad
Protect the external keypad port
Protect the internal parts and components
Fix the sliding cover
Protect the inner components and fix the cables of the main circuit
See Product Overview for detailed information
Refer to the Keypad Operation Procedure
See Electric Installation for detailed information
See Electric Installation for detailed information
Fix the fan cover and fan
See Maintenance and Hardware Fault Diagnose for
detailed information
Protect the fan
Illustration
Product overview