Prerequisites And Preparation; Field Replaceable Units; Replacing Cisco Asr 9001 Router Components - Cisco ASR 9001-S Hardware Installation Manual

Replacing Cisco ASR 9001 Router Components

The router is equipped as ordered and is ready for installation and startup when it is shipped. As network
requirements change, you may need to upgrade the system by adding or changing components. This
chapter describes how to maintain router components.
Procedures for maintaining the router are described in these sections:
•
•
•
•
•

Prerequisites and Preparation

Before you perform any of the procedures in this chapter, be sure that you:
•
•
•
•

Field Replaceable Units

These components are field replaceable units (FRUs):
•
•
•
•
•
OL-26701-02
Prerequisites and Preparation, page 5-1
Removing and Replacing the Fan Tray, page 5-2
Removing and Replacing AC or DC Power System Components, page 5-3
Removing a Chassis from the Equipment Rack, page 5-5
Installing a Replacement Chassis in the Equipment Rack, page 5-6
Review the "Safety Guidelines" section on page
Read the safety and ESD-prevention guidelines described in the
Information" section on page
Ensure that you have all the necessary tools and equipment before beginning the procedure.
Have access to these documents during the installation:
Regulatory Compliance and Safety Information for the Cisco ASR 9000 Aggregation Services
–
Router publication that shipped with the router.
Chassis
Power modules
Fan tray
Gigabit Ethernet small form-factor pluggable transceiver modules (SFPs)
10-Gigabit Ethernet small form-factor pluggable transceiver modules (XFPs)
C H A P T E R
1-2.
1-3.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
5
"Compliance and Safety
5-1