Removing Rp, Fc, And Line Cards From The Cisco Asr 9922 Router And Cisco Asr 9912 Router - Cisco ASR 9000 Series Installation Manual

Removing Cards from the Chassis
Removing RP, FC, and Line Cards from the Cisco ASR 9922 Router and Cisco ASR
9912 Router
This section describes how to remove the Route Processor (RP) cards, Fabric Cards (FC), and line cards
from the Cisco ASR 9922 Router and Cisco ASR 9912 Router.
slot numbering for each router.
Table 2-2 Router Components and Slot Numbering for the Cisco ASR 9922 Router and Cisco ASR 9912 Router
Router Model Number
Cisco ASR 9922 Router
Cisco ASR 9912 Router
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
2-34
Router Components and Slot Numbering
22 slots.
•
• Version 2 power system (see
• Up to seven FC cards installed between the two RSP cards in the middle cage of the chassis.
• Ten line cards installed in slots 0 through 9 in the top card cage.
Ten line cards installed upside down in slots 10 through 19 in the bottom card cage.
•
12 slots.
•
Version 2 power system (see
•
Up to seven FC cards installed between the two RP cards above the power trays.
•
Ten line cards installed in slots 0 through 9 below the fan trays.
•
Chapter 2
Table 2-2
Figure 2-27).
Figure 2-27).
Unpacking and Installing the Chassis
describes the components and