Attaching A Chassis Ground Connection - Cisco ASR1006-10G-SEC/K9 - ASR 1006 VPN+FW Bundle Router Installation Manual

Chapter 6 Cisco ASR 1006 Router Overview and Installation
Figure 6-12
Figure 6-12
1
2
This completes the procedure for installing the cable-management brackets on the chassis.

Attaching a Chassis Ground Connection

Connecting the Cisco ASR 1006 Router chassis to ground is required for all DC powered installations
and any AC powered installation where compliance with Telcordia grounding requirements is necessary.
The dual-lug chassis stud must be installed, the SIP and SPA must be fully inserted and screwed in and
Caution
earthed to prevent a potential hazard in a telecom line.
OL-13208-09
shows the cable-management bracket attached to the chassis in a rack.
Installing the Cable-Management Bracket
3
2
Cable-management bracket screw location
Cable-management bracket
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
1
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
1
3
Chassis front rack-mount bracket and ear
holes
—
—
Attaching a Chassis Ground Connection
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
6-19