Creating A Site Log; Receiving The Cisco Asr 907 Router - Cisco ASR 907 Hardware Installation Manual

Creating a Site Log

Task
Types and numbers of interfaces verified
Safety recommendations and guidelines reviewed
Installation Checklist copied
Site Log established and background information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device names, and so on, available
Required tools available
Network connection equipment available
Cable-management brackets installed (optional, but recommended)
AC power cables connected to AC sources and router
DC power cables connected to DC sources and router
Network interface cables and devices connected
System power turned on
System boot complete (STATUS LED is on)
Shared port adapters are operational
Correct software configuration displayed after system banner appears
Creating a Site Log
The Site Log provides a record of all the actions related to installing and maintaining the router. Keep it in
an accessible place near the chassis so that anyone who performs tasks has access to it.
Create the Site Log prior to the installation. See
Log as well as a sample Site Log that can be used to make copies.

Receiving the Cisco ASR 907 Router

Each Cisco ASR 907 Router chassis is shipped in a container. See the figure below.
Cisco ASR 907 Router Hardware Installation Guide
50
Verified By Date
Site Log and Manufactures
Preparing for Installation
for more information on the Site