Table of Contents
Advertisement
10.1
General
10.2
Important information
This chapter explains in detail all submenus and setting options for inputs/
outputs and display functions in the "Configuration" menu.
Complete configuration of the device is described in the operating manual.
⇨ O
perating manual B 202581.0
WARNING!
After every configuration change, the device restarts functions affected by the
changes. Analog and digital outputs can assume undesired states during start-
up.
Therefore, configuration changes must never be made while equipment is op-
erating!
CAUTION!
Besides incorrect installation, incorrectly set values on the device can impair
performance of the connected process or cause damage. Therefore, always
provide safety devices independent of the device and allow only qualified per-
sonnel to make settings.
CAUTION!
When changing configuration data that are relevant for the data monitoring and
recording function, data recording is terminated and a new recording session
begun.
NOTE!
Changes to the configuration settings described in this chapter can be made
directly on the device or via the JUMO PC setup program.
NOTE!
Settings in the "Configuration" menu can be changed only if a user with corre-
sponding user rights is logged in.
⇨
Chapter 8.1.1 "Passwords and user rights", page 77
NOTE!
Changes to the configuration go into effect only after you leave the configura-
tion menu ("Exit" menu item or "Close window" button).
10 Configuration
9
Advertisement
Table of Contents
