JUMO AQUIS touch S Assembly Instructions Manual page 144

21 Annex
144
(4.2 V). The voltage at sensor 2 (ecoLine O-DO) roughly corresponds to the
minimum value (5 V). For sensor 3 (ecoLine NTU), the voltage is not enough.
NOTE!
For the operation of JUMO ecoLine sensors, it is generally recommended to
use JUMO digiLine hubs and to generate the DC 5.3
the JUMO digiLine hub.
NOTE!
The voltage drop calculation shown here does not apply for the use of JUMO
tecLine sensors (types 20263x).
‫ټ‬ V supply voltage within