10 Configuration
Configuration point Selection/
Ra
Rs
Re
Alarms 1/2
a
Resistance transmitter
b
The temperature unit specified in the basic settings appears in the entry field.
⇨
Chapter 10.3 "Basic settings", page 10
16
setting option
0 to 99999 Ω
6 to 99999 Ω
0 to 99999 Ω
Analog input alarms are used to monitor measured values in relation to ad-
justable limit values.
The alarm settings for all analog device functions are explained together.
⇨
Chapter 10.11.1 "Alarms for analog signals and digital sensors", page 42
Explanation
only for IN 5: Resistance value between the slid-
er (S) and start point (A) in a resistance transmit-
a
ter/potentiometer
when the slider is at the start
point.
only for IN 5: Span of the variable resistance
value between the slider (S) and start point (A)
only for IN 5: Resistance value between the slid-
er (S) and end point (E) in a resistance transmit-
a
ter/potentiometer
when the slider is at the end
point.