Screen; Colors - JUMO AQUIS touch S Assembly Instructions Manual

10 Configuration
10.4.2

Screen

Configuration item
Activation of screen-
saver
Wait time for screen-
saver
Signal screensaver
Brightness
10.4.3

Colors

Configuration point Selection/
Alarm 1 to 2
Recording:
Analog channel
1 to 4
Binary channel
1 to 3
Background, ana-
logue
Background, binary
Color t-stamp diagr
Color diag. traces
Controller
Background
Setpoint value
Actual value
Output level
Heating contact
Cooling contact
12
Open: Device Menu > Configuration > Display > Screen
Selection/
setting option
inactive
time to switch off
control signal
10 to 32767 s
Selection from
binary selector
1 to 10
Open: Device Menu > Configuration > Display > Colors
setting option
Selection from
color palette
Selection from
color palette
Selection from
color palette
Explanation
Type of screensaver activation
only with activation of the screensaver after
wait time:
Time to wait before displaying the screensaver
when there is no activity on the device
only with control signal screensaver activa-
tion:
Signal for activating the screensaver
Display brightness (10 levels)
Explanation
Color setting for signaling alarms 1 to 2 of the
measuring inputs
Upon reaching the set alarm values, the mea-
sured value displays and bar graphs appear in
the set colors.
Color setting for the visualization elements of the
individual recorder screens
Color setting for the visualization elements of the
individual controller screens