Table of Contents
Advertisement
12 Calibrating a pH measuring chain
12.2.2
Calibration default settings for pH sensors
56
Before you can perform a calibration, you must first enter the necessary calibra-
tion default settings. The possible settings for the pH Calibration are described
in the following.
Open the calibration default settings:
Device Menu > Calibration > Select Analysis Input or Digital Sensor Input for
pH/redox/NH3 > Calibration Presets
NOTE!
The "Calibration default settings" menu appears in the Device menu only if a
user with corresponding user rights is logged in. The "Calibration default set-
tings" menu for a digital sensor is visible for the digital sensor concerned only
when it is linked.
⇨
Chapter 8.2.1 "Log-on/Log-out", page 91
⇨
Chapter 8.2.7 "Digital sensors", page 97
Sample screen:
pH calibration default
settings
Advertisement
Table of Contents
