Configuration; Parameterization; Device Info; Audit Trail List - JUMO LOGOSCREEN 600 Brief Instructions

Configuration of the electronic signature: see operating manual, "Configuration – in setup pro-
gram only" chapter > "Electronic signature".
Example of an electronic signature:
 Chapter 5.8 "Electronic signature", page 63
5.2.2

Configuration

This menu contains functions for configuring the device. The functions are available both on
the device and in the setup program (see the "Configuration" chapter in the operating manual).
In addition to this, there are functions that can only be configured with the setup program (see
the operating manual, chapter "Configuration - in setup program only" and "Online parame-
ters").
5.2.3

Parameterization

This menu contains the functions for parameterizing the device (see the "Parameterization"
chapter in the operating manual).
5.2.4

Device info

This menu contains information about the device (name, versions), the current process values
(inputs, outputs, internal functions), and Ethernet interface.
The device version is indicated through the "Version" parameter in the submenu "Versions" >
"Basic device":
Standard = device in standard version
21 CFR Part 11 = device in FDA compliant version (as of device version 02)
With extra code 887 (digital certificate) or 888 (FDA) information about the digital certificate is
also displayed in this menu.
5.2.5

Audit trail list

This menu lists the audit trail messages generated by the device.
All user intervention with the device is automatically recorded and stored in the audit trail list of
the device. The audit trail list is managed independently of the event list.
The audit trail list is designed as a ring buffer which can contain a maximum of 150 entries.
When the list is full, each new entry causes the oldest entry to be deleted from the list.
5.2.6

Service

This menu contains various service functions.
Default configuration
You can store the current device configuration with this function.
Similarly, a previously stored configuration can be loaded as the current configuration.
5 Operation
35