Table of Contents
Advertisement
10 Configuration
10.3
Basic settings
Configuration point Selection/
Device name
National language
Language select after
power on
Mains frequency
Device temp.
Interface temperature Degrees Celsius
Memory alarm limit
10
Open: Device Menu > Configuration > Basic Settings
setting option
up to 20 text characters
German
English
Yes
No
50 Hz
60 Hz
Degrees Celsius
Degrees Fahrenheit
Degrees Fahrenheit
0 to 100 %
Explanation
Device ID, e.g. for identification of exported mea-
surement data in the JUMO PCA 3000 evalua-
tion software
Setting the operating language
Additional languages can be installed on the de-
vice using the setup program.
⇨
Operating manual B 202581.0
Specifies whether a prompt for selecting the op-
erating language should appear when the device
is switched on
Supply frequency of the electric power grid serv-
ing the mounting site
The supply frequency must be specified to sup-
press EMC interference caused by the mains
voltage. Setting the correct supply frequency is
thus also necessary when supplying the device
with direct voltage.
Setting the default on the temperature unit for all
temperature values in the device
Setting the default on the temperature unit for all
temperature values communicated via interfaces
If the available memory display reaches this val-
ue, the memory alarm is triggered.
Advertisement
Table of Contents
