Metering Menu; Control Menu - GE D90 Plus Instruction Manual

CHAPTER 4: INTERFACES

Metering menu

Control menu

PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
The system metering quantities are available from the front panel in the metering menu.
These values are derived automatically from the metering source. There are four user-
configurable metering summary screens and three fixed metering screens available.
There are four user-configurable metering pages. Each location in the metering grid can
be either text or an actual value. The EnerVista UR
configure each of the metering display pages.
The following three fixed metering screens are also available.
• The energy page displays and allows the user to reset four quadrant energy values.
• The phasor screen graphically displays the phasor components of the system voltage
(phase-neutral) and current for the selected metering source.
• The sequence screen graphically displays the sequence components of the system
voltage and currents for the selected metering source.
The control menu provides the option to select a control diagram view or select one of the
user-programmable pushbutton views. The menu names are user-configurable. The
overview window is shown below.
Figure 43: Control menu overview display
The user can access the mimic diagram and dedicated control pushbuttons from through
the primary control menu. The mimic page provides status of circuit breakers and
disconnect switches. Operation of these devices is also available through the control
pushbuttons.
Figure 42: Menu structure
Plus
Setup software provides the ability to
FRONT PANEL OVERVIEW
69