GE D90 Plus Instruction Manual page 397

CHAPTER 7: PROTECTION
Contact input settings
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 326: Contact input and output assignments
All available contact inputs and output can be reassigned using the >> and << buttons.
When the input detects a voltage decrease, the input circuitry will draw 10 mA of current. If
the voltage decrease is due to a state change then the voltage will quickly decrease,
speeding up the recognition of the reset of the field contact.
Select the Settings > Protection > Protection Inputs/Outputs > Contact Inputs > Contact
Inputs menu item to access the contact input configuration settings.
Figure 327: Contact input configuration settings
The contact inputs menu contains configuration settings for each contact input. Upon
startup, the relay processor determines (from an assessment of the installed modules)
which contact inputs are available and then displays settings for only those inputs. The
following settings are available for each contact input.
PROTECTION INPUTS AND OUTPUTS
387