Flexstates - GE D90 Plus Instruction Manual

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

FLEXSTATES

IEC 61850 GOOSE analog input actual values

Range: up to 65 alphanumeric characters

This value displays the name programmed for the corresponding remote device.

Range: 0 to 4294967295 in steps of 1

This value is obtained from the indicated remote device and is incremented whenever a

change of state of at least one DNA or UserSt bit occurs.

Range: 0 to 4294967295 in steps of 1

This value is obtained from the indicated remote device and is incremented whenever a

GSSE message is sent. This number will rollover to zero when a count of 4294967295 is

incremented.

Select the Actual Values > Communications > Inputs/Outputs > IEC61850 GOOSE

Analog Inputs menu item to open the IEC 61850 GOOSE analog input actual values

Figure 113: IEC 61850 GOOSE analog input actual values

The following actual value is available for each of the IEC 61850 GOOSE analog inputs.

IEC 61850 GOOSE Analog Input 1 Actual

Range: Yes, No

This value displays the IEC 61850 GGIO3 analog input data point 1. The GGIO3 analog

data values are received via IEC 61850 GOOSE messages sent from other devices.

The FlexStates feature provides a mechanism where any of 256 selected FlexLogic™

operand states can be used for efficient monitoring. The feature allows user-customized

access to the FlexLogic™ operand states in the D90

. The state bits are packed so that

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

CHAPTER 6: COMMUNICATIONS