GE D90 Plus Instruction Manual page 610

METERING SUMMARY EDITOR
600
Figure 534: Metering configuration window
Text
Range: up to 20 alphanumeric characters
Default: ---
This setting defines the selected metering cell as a text box. These are typically used as
headings. Specify up to 10 alphanumeric characters.
Parameter
Range: any FlexAnalog™ parameter
Default: Digital Counter 1 Value
This setting selects a FlexAnalog™ parameter that specifies the metered value to display
in the metering cell.
Units
Range: up to 4 alphanumeric characters
Default: ---
This setting specifies a four-character alphanumeric string that is used in the metering
cell display for the corresponding metered value.
Scale Factor
Range: G (Giga), M (Mega), k (kilo), None
Default: None
This setting allows the user to select a scaling factor for displayed metered value. The
range is restricted to correspond to the selected analog value parameter.
Multiplier
Range: dependent on selected analog value
Default: ---
This setting allows the user to specify a multiplier for the metering parameter value if the
scaling factor is set to "None". The range is restricted to correspond to the selected
actual value parameter.
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 12: LOCAL INTERFACE