GE D90 Plus Instruction Manual page 493

CHAPTER 8: AUTOMATION
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
The following logic calculates the magnitude and angle of I
to virtual analog 2 and virtual analog 3, respectively.
Figure 412: Magnitude and angle calculation logic for I
The following logic calculates the real and imaginary parts of the local positive-sequence
voltage and assigns these results to virtual analog 4 and virtual analog 5, respectively.
Figure 413: Real and imaginary component calculation logic for local voltage
Next, the real and imaginary components of the remote voltage is calculated and assigned
to virtual analog 6 and virtual analog 7, respectively.
Figure 414: Real and imaginary component calculation logic for remote voltage
The magnitude of the remote voltage is calculated next and assigned to virtual analog 9.
Note that virtual analog 8 is used as an intermediate value in the automation logic.
AUTOMATION LOGIC
× Z and assigns these results
1
× Z
1
483