Protection Virtual Outputs - GE D90 Plus Instruction Manual

CHAPTER 7: PROTECTION
Protection virtual input actual values

Protection virtual outputs

PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 321: Protection virtual input logic
Select the Actual Values > Protection > Protection Inputs/Outputs > Virtual Inputs menu
item to open the protection virtual input actual values window.
Figure 322: Protection virtual input actual values
The following actual values are available for all enabled protection virtual inputs.
Name
Range: up to 12 alphanumeric characters
This value displays the programmed
Status
Range: On, Off
This value indicates the logic state of the virtual input.
There are 96 virtual outputs that may be assigned via FlexLogic™. Virtual outputs are
resolved in each pass through the evaluation of FlexLogic™ equations.
Select the Settings > Protection > Protection Inputs/Outputs > Virtual Outputs menu
item to access the protection virtual output configuration settings.
PROTECTION INPUTS AND OUTPUTS
for the corresponding protection virtual input.
ID
383