AUTOMATION CONTROL
Local-remote control scheme
448
Figure 376: Breaker 1 status substituted
The following indications are provided for breakers and disconnects.
Figure 377: Front panel indicators for breakers and disconnects
The local-remote control scheme is used to define the current location for operator control
of power system devices (for example, breakers, disconnects, etc.). The function accepts
inputs from the front panel interface or from an external source. The automation logic
outputs
(L/R-L On
and
L/R-R
elements. The position of the latch is stored in non-volatile memory.
Select the Settings > Automation > Control > Local-Remote menu item to open the local-
remote control scheme configuration window.
On) are assigned as inputs to the breaker and disconnect
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 8: AUTOMATION