METERED VALUES
Ground current metering
Phase voltage metering
566
Select the Actual Values > Metering > Ground Current menu item to open the metered
ground current window.
Figure 492: Ground current metering window
The following actual values are available for each applicable source.
Name
Range: up to 20 alphanumeric characters
This value displays the user-programmed name for each source.
Phasors
Clicking the View button for this value allows the user to configure and display a
graphical representation of selected current and voltage phasors. Refer to
current and voltage phasors
RMS Ig
Range: 0 to 999999.999 A in steps of 0.001
This actual value displays the ground RMS current RMS for each source.
Select the Actual Values > Metering > Phase Voltage menu item to open the metered
phase voltage window.
Figure 493: Phase voltage metering window
The following actual values are available for each applicable source.
on page 571.
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 11: METERING
Observing