Contact Input And Output Default Assignment - GE D90 Plus Instruction Manual

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

AUTOMATION INPUTS AND OUTPUTS

Contact input and output default assignment

Figure 390: Automation virtual output programming example

When a new settings file is created, the available contacts are automatically assigned to

the protection or automation functions according to the following convention.

First I/O module → protection.

All subsequent I/O modules → automation.

For example, if a D90

is configured with contact input/output cards in slots E, F, and G,

then the inputs and outputs associated with slot E are assigned to protection and the

inputs and outputs associated with slots F and G are assigned to automation.

These default assignments may be changed to match the requirements of the application.

This is done by right-clicking on the setting filename and choosing the menu Manage

Settings File > I/O Assignments menu item. The following window is displayed.

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

CHAPTER 8: AUTOMATION