Annunciator Configuration - GE D90 Plus Instruction Manual

CHAPTER 12: LOCAL INTERFACE

Annunciator configuration

PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 506: Annunciator alarm sequence
The annunciator states are described in the following table.
Table 44: Acknowledgeable alarm states
Sequence (initial Process (status)
state)
Normal Normal
Normal Abnormal
Alarm Normal
Alarm Normal
Alarm Abnormal
Acknowledged Abnormal
Acknowledged Normal
Ringback Normal
Ringback Abnormal
The visual indications are displayed as follows.
• Off: grey text on a darker grey background.
• On: user-configurable.
• Fast flash: Alternating between the off state and the on state two times per second.
• Slow flash. Alternating between the off state and the on state one time per second.
In the event of an alarm, the page containing the alarm will be promoted to active page. If
there are multiple pages with alarms, the page with the lowest page number is promoted.
If there are alarms on multiple pages, and alarms on some pages have already been
acknowledged (but not cleared) by the user, then the pages with active alarms move ahead
of the pages that have acknowledged alarms. The user will always have to navigate
through the pages of alarms to view them.
Display of alarm pages is prioritized according to active window (unacknowledged or
flashing alarm) and page number (for example, if two pages have an unacknowledged
alarm, the page with the lowest number will automatically be promoted as the displayed
page).
Select the Settings > Local HMI > Annunciator Panel menu item to open the annunciator
configuration page.
Pushbutton Sequence (final
(input) state)
N/A N/A
N/A Alarm
N/A Alarm
Acknowledged Normal
Acknowledged Acknowledged
N/A Acknowledged
N/A Ringback
Reset Normal
N/A Acknowledged
ANNUNCIATOR PANEL
Visual indication
Off
Fast flash
Fast flash
Off
On
On
Slow flash
Off
On
583