Network Settings; Ethernet Ports - GE D90 Plus Instruction Manual

NETWORK SETTINGS

Network settings

Ethernet ports

90
Figure 71: Simple dual redundant network topology
The topology below illustrates a dedicated LAN for configuration and monitoring functions
and dual redundant LANs for SCADA and GOOSE traffic. Each D90
clients on either network as required. GOOSE messages are transmitted and received on
both LANs simultaneously. Ports 2 and 3 are configured for dual IP redundancy.
Figure 72: Simple three network topology
Settings are available to configure the Ethernet configuration, as well as the TFTP and
SNTP protocols.
The Ethernet ports can be configured for single or dual IP redundancy.
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: COMMUNICATIONS
Plus
device will service