Pre-Configured Mimic Diagrams - GE D90 Plus Instruction Manual
Line distance protection system
Hide thumbs
Also See for D90 Plus:
- Instruction manual (688 pages) ,
- Communications manual (222 pages) ,
- Instruction manual (662 pages)
Table of Contents
Advertisement
MIMIC DIAGRAM EDITOR
Pre-configured mimic diagrams
594
The overview mode provides a preview of how the mimic diagram will appear on the
overview screen of the front panel interface.
The control mode provides a preview of how the mimic diagram will appear on the control
screen of the front panel interface.
These modes allow the user to ensure that the mimic diagram is displayed appropriately in
all display screens. The following diagram illustrates the viewing modes.
Figure 520: Mimic diagram view modes
Plus
The EnerVista UR
Setup software contains a library of 12 pre-configured mimic
diagrams that can be loaded into the mimic diagram editor. Click the Load button to load a
pre-configured mimic diagram from the library. User-created mimic diagrams can also be
saved into this library. The following pre-configured diagrams are available.
•
Breaker-and-a-half scheme.
•
Breaker-and-a-half scheme with breaker disconnects.
•
Breaker-and-a-half scheme with breaker and line disconnects.
•
Breaker-and-a-half scheme with breaker, line, and ground disconnects.
•
Breaker-and-a-half scheme with line disconnect.
•
Breaker-and-a-half scheme with line and ground disconnects.
•
Double-bus bypass scheme 1.
•
Double-bus bypass scheme 2.
•
Double-bus bypass scheme with line and ground disconnects.
•
Single-bus scheme.
•
Single-bus scheme with line disconnect.
•
Single-bus scheme with line and ground disconnects.
Breakers and disconnect switches are pre-assigned to twelve diagrams shown in the
following figures. If a breaker or disconnect switch has not been enabled, then the device
will display as a solid block.
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 12: LOCAL INTERFACE
Advertisement
Table of Contents
