Applying A Dme Effect To A Key - Sony MVS-8000X User Manual

When pattern is selected
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Edge softness
3 Pattern Pattern number
a) The pattern is the same as a standard wipe. (See "Wipe Pattern List" (page
308).)
Using the subsidiary mask
In the key control block, press the [SUB MASK] button,
turning it on. The parameter settings depend on the mask
source selected as [Wipe] or [Utility 1 Bus] in the <Mask
Source> group of the Sub Mask menu for the key.
When wipe is selected
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Edge softness
When utility 1 bus is selected
Knob Parameter Adjustment
1 Clip Reference level for
creating mask
signal
2 Gain Gain

Applying a DME Effect to a Key

Notes
• When the SDI interface is used to connect the DME,
DME effects (including DME wipes) can be used in only
one place for one M/E bank.
• When the dedicated interface is used to connect the
DME, the number of keys to which DME effects
(including DME wipes) can be applied simultaneously
for one M/E bank varies as follows depending on the
execution mode of the DME wipe pattern selected for the
background.
- MVS-8000X
Setting values Applicable
block
0 to 100
0 to 100
a)
1 to 24
Other than
M/E-4
M/E-4
Setting values
0 to 100
0 to 100
Setting values
+109 to –7
- MVS-7000X
–100 (shown as
–00) to +100 Key to
which
DME
effects are
applied
Keys 1 to 4 No DME wipe used
Keys 5 to 8 -
a) 0 when the system signal format is 1080P.
b) 1 when the system signal format is 1080P and the DME input/output
c) 0 when the system signal format is 1080P and the DME input/output
• When combining DMEs connected via the dedicated
interface and the SDI interface, you can increase the
number of keys to which DME effects are applied
simultaneously. (Requires a setting in setup.)
For details, see "Setting DME and Switcher Interfaces"
in Chapter 20 (Volume 2).
Assigning a DME to a key
1
In the key control block, press the delegation buttons
[M/E1] and [KEY1].
Key to DME wipe
which pattern for
DME background
effects
are
applied
Keys 1 No DME
to 4 wipe used
One-channel
mode
Two- or
three-
channel
mode
Keys 5 -
to 8
Keys 1 No DME
to 4 wipe used
One-channel
mode
Two- or
three-
channel
mode
Keys 5 -
to 8
DME wipe pattern
for background
One-channel mode
Two- or three-
channel mode
signal format is set to dual link mode.
signal format is set to dual link mode.
Key Adjustments (Key Control Block)
Number of keys
to which DME
effects can be
applied
simultaneously
2
1
0
a)
2
b)
2
c)
1
0
0
Number of keys to
which DME effects
can be applied
simultaneously
2
1
0
a)
2
113