Sony MVS-8000X User Manual page 250

Picture
Flex shadow
After
inversion
Before
inversion
When H is enabled
Setting a combine shadow
When there are several images, adds a flex shadow in the
depth of an image or overlays multiple flex shadows.
Example 1: When Flex Shadow is enabled on both of two channels.
Video
Shadow
No combine shadow is set.
Combine shadow is enabled.
Density is set to 100.00.
Combine shadow is enabled.
Density is set to 0.00.
250
Applying Special Effects (Edge Effects)
Before
inversion
After
inversion
When V is enabled
Video
Shadow
Example 2: Flex Shadow is enabled on one channel only.
Video
Shadow
No combine shadow is set.
Combine shadow is enabled.
Density is set to 100.00.
Combine shadow is enabled.
Density is set to 0.00.
1
In the Flex Shadow menu, press [Combine Shadow],
turning it on.
2
Adjust the following parameter.
Knob Parameter Adjustment
1 Density Density of
combine
shadow
Notes
• The Combine Shadow effect is applied to all
shadows, not only the sections where shadows
overlap.
• Combine Shadow is enabled when the Flex Shadow
effect and the global effect Combiner are enabled. In
this state, Combine Shadow remains enabled even if
the global effect is disabled.
• In Combine Shadow, the settings for the channel
with the lowest number among the channels being
combined are enabled.
Flex shadow creation example
The flow of flex pattern creation will be explained using
the following pattern as an example.
Video
Setting values
0.00 to 100.00