Color Mix Settings - Sony MVS-8000X User Manual

When Soft is selected
Knob Parameter Adjustment
1 Soft Edge
softness
When Soft Border is selected
Knob Parameter Adjustment
1 Width Border width 0.00 to 100.00
2 Inner Soft Border inner
softness
3 Outer Soft Border outer
softness
Selecting the signal or color to be inserted
in the wipe crop border
When you are applying a border or soft border to the wipe
crop, you can select the signal or color to be inserted in the
border.
1
In the <Border Fill> group of the Wipe Crop menu,
select one of the following.
Flat Color: flat color
Mix Color: a mix color signal combining color 1 and
color 2 (see the next section, "Color Mix
Settings")
Ext Video: an external video signal input to the Ext IN
connector
2
When Flat Color is selected in step 1 only, adjust the
following parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue

Color Mix Settings

Notes
The color mix function is not supported on the MVE-
8000A.
Creating a color combination pattern
To select the pattern
1
In the DME menu, select VF1 'Edge' and HF7 'Color
Mix.'
The Color Mix menu appears.
2
Setting values
0.00 to 100.00
3
Setting values
0.00 to 100.00
To set the pattern size and position
0.00 to 100.00
1
2
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
To invert the regions of the two colors
In the Color Mix menu, press [Color Invert], turning it on.
Adjusting the color 1 and color 2
1
Press [Mix Pattern Select].
The Mix Pattern Select menu appears.
Press any of the displayed patterns (standard wipe
patterns 1 to 24) to select it.
In this state, you can adjust the pattern size and border
softness with the knobs.
(For details of the parameters, see the next item.)
In the Color Mix menu, press [Position/Size].
Set the following parameters.
The setting range for the parameters depends on the
system selected signal format (SD/HD) and aspect
ratio (4:3/16:9), as follows.
For SD format
Knob Parameter Adjustment
1 H Horizontal
position
2 V Vertical
position
3 Size Pattern size
4 Soft Softness of
the pattern
5 Pattern Pattern
number
a) For 4:3 mode
b) For 16:9 mode
For HD format
Knob Parameter Adjustment
1 H Horizontal
position
2 V Vertical
position
3 Size Pattern size
4 Soft Softness of
the pattern
5 Pattern Pattern
number
a) For 4:3 mode
b) For 16:9 mode
In the Color Mix menu, to adjust color 1 press
[Color1], and to adjust color 2 press [Color2].
Applying Special Effects (Edge Effects)
Setting values
–8.00 to +8.00
a)
–6.00 to +6.00
b)
–4.50 to +4.50
0.00 to 100.00
0.00 to 100.00
1 to 24
Setting values
a)
–24.00 to +24.00
b)
–32.00 to +32.00
–18.00 to +18.00
0.00 to 100.00
0.00 to 100.00
1 to 24
253