Sony MVS-8000X User Manual page 601

Icon Message
Blue Symbol file not match (–4).
No data between two symbol files (–5).
Cannot find symbol file (–8).
Clip frame error (–10).
Clip not found (–12).
Clip is playing or being edited (–13).
Clip register error (–14).
Can't extract pair clip (–15).
Clip id not enough (–50).
Still frame on FM 2nd board (–51).
Clip frame number can't be ODD in 720P
format (–9).
File Frame Memory
Some requests are skipped.
Following operation is not permitted.
— Loading that will cause duplicate register
name.
File Open Status
ERROR (01)
ERROR (02)
ERROR (FF): No target device has been
assigned
Description
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if a blue marker frame file is invalid.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if there is no data between two marker frames.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if a marker frame file was not found.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if a clip frame count is invalid (internal processing
error).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if the specified clip does not exist.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if the specified clip is being played back or
edited.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if the specified register number data cannot be
processed (internal processing error).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if an attempt is made to extract a pair clip.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if there are 100 clips or more.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if a still image was extracted from an external
clip.
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if an odd number of clips are extracted (720P
format only).
7151: File >Frame Memory
7162: File >All, External File >Import/Export
In the above menu, an attempt was made to load a file of a name
already existing in the register.
533X: Device >DDR/VTR
When an error is returned from the DDR/VTR, one of these
messages appears, depending on the error number.
Use Menu 7355: Engineering Setup >DCU >Serial Port/MPE
Assign or Menu 7325.4: Engineering Setup >Panel >Device
Interface >Serial Port Assign to check the device settings.
601
Error Messages