Keyframe Control Block - Sony MVS-8000X User Manual

3 MENU button
1 Operating buttons
a Operating buttons
The functions of these buttons are equivalent to the
functions in three-dimensional transform operation mode
of the operating buttons of the trackball type device control
block.
Notes
To select a required DME channel, use the region selection
buttons in the numeric keypad control block.
Use of the [SHIFT] button
Pressing a button in the device control block while holding
down the [SHIFT] button enables the shifted function of
the button. Also, pressing a button in the keyframe control
block while holding down the [SHIFT] button enables the
shifted function of the button.
About the [CLR WORK BUFR] (clear work buffer)
button
When [M/E-1] or [P/P] is selected along in the numeric
region selection buttons of the keypad control block, press
this button twice in rapid succession to reset all parameters
of the selected M/E or P/P to their initial values. When a
DME channel is selected in the region selection buttons,
the operation is the same as when using a trackball type
device control block in the three-dimensional transform
operation mode.

Keyframe Control Block

In the keyframe control block, you can carry out effect
editing and execution.
b Joystick
When the three-dimensional transform operation
mode is enabled
By moving this, you can carry out operations in the x-, y-,
and z-axes.
When the following buttons are held down, operation of
the joystick is switched to a finer control. (fine mode)
• The button on the end of the joystick
• [SRC] button
• [TRGT] button
Depending on the settings made in the Setup menu, the
operation speed multiple can be changed in fine mode.
When the effect run control mode is enabled
By moving the joystick sideways, you can run the
keyframe effect, independent of the STOP NEXT KF, EFF
LOOP, and similar settings in the keyframe control block.
Move to the right to run the effect in the normal direction,
and to the left for the reverse direction.
c MENU button
The function of this button is equivalent to the function of
the [MENU] button in the trackball type device control
block.
Names and Functions of Parts of the Control Panel
2 Joystick
33