Basic Procedure For Dme Wipe Settings; Dme Wipe Settings Menu; Dme Wipe Pattern Selection - Sony MVS-8000X User Manual

- MVS-8000X
Applicable Key to
block which
DME
effects
are
applied
Other than Keys 1
M/E-4 to 4
Keys 5
to 8
M/E-4 Keys 1
to 4
Keys 5
to 8
- MVS-7000X
Key to DME wipe pattern
which for background
DME
effects are
applied
Keys 1 to 4 No DME wipe used
One-channel mode
Two- or three-
channel mode
Keys 5 to 8 -
a) 0 when the system signal format is 1080P.
b) 1 when the system signal format is 1080P and the DME input/output
signal format is set to dual link mode.
c) 0 when the system signal format is 1080P and the DME input/output
signal format is set to dual link mode.
144

Basic Procedure for DME Wipe Settings

DME wipe Number of keys
pattern for to which DME
background effects can be
applied
simultaneously
No DME 2
wipe used
One-channel 1
mode
Two- or 0
three-
channel
mode
-
a)
2
No DME
b)
2
wipe used
One-channel c)
1
mode
Two- or 0
three-
channel
mode
- 0
Number of keys to
which DME effects
can be applied
simultaneously
2
1
0
a)
2
Basic Procedure for DME
Wipe Settings
You carry out DME wipe setting operations principally
using the DME Wipe menu for each bank.
This section describes the basic procedures for DME wipe
settings, taking the M/E-1 >DME Wipe menu as an
example.
For details of independent key transition DME wipe
settings, see "DME Wipe Settings for Independent Key
Transitions" (page 150).
For details of resizer DME wipe, see "Resizer DME Wipe
Setting" (page 152).

DME Wipe Settings Menu

Accessing the DME Wipe menu
To access the M/E-1 >DME Wipe menu, use either of the
following operations.
• In the menu control block, select the top menu selection
button [M/E 1], and press VF6 'DME Wipe.'
Notes
To select [M/E-4], a previous assignment in the Setup
menu is required.
• In the transition control block of the M/E-1 bank, press
the transition type selection button [DME] twice in rapid
succession.

DME Wipe Pattern Selection

Selecting a DME wipe pattern by a menu
operation
1
In the M/E-1 >DME Wipe menu, select HF1 '1ch' for
one-channel mode, HF2 '2ch' for two-channel mode
or HF3 '3ch' for three-channel mode.
2
Select the desired DME wipe pattern group with one of
the following buttons.
• Slide/Squeeze: slide and squeeze
• Split/Door: split and door
• Flip Tumble: flip tumble
• Mirror/Sphere: mirror and sphere
• Character Trail: character trail