Sony MVS-8000X User Manual page 129

Border: border
Soft: soft edge
Soft Border: soft border
3
Set the parameters according to the selection in step 2.
When border is selected
Knob Parameter Adjustment
1 Width Border width
When soft edge is selected
Knob Parameter Adjustment
1 Soft Edge softness
When soft border is selected
Knob Parameter Adjustment
1 Width Border width
2 Inner Soft Border inner
softness
3 Outer Soft Border outer
softness
4
When you selected border or soft border, select the
edge fill signal in the <Edge Fill> group.
Utility 2 Bus: signal selected on the utility 2 bus
Matte: signal from the dedicated color matte
generator
5
Depending on the operation in step 4, carry out the
following operation.
When 'Utility 2 Bus' is selected: Press the key
delegation button [UTIL2], turning it on, and
select the signal in the key row.
When 'Matte' is selected: In the same Edge/
Direction menu, press [Matte Adjust] to display
the Matte Adjust menu, then adjust the single-
color or two-color combination color matte. Select
whether to use a single-color matte or a two-color
combination in the <Edge Matte> group.
Flat Color: Adjust color 1 with the following
parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
When you select [Mix Color] for a two-color
combination, see the next paragraph.
Carrying out a color mix for the edge fill
matte
When you selected [Matte] for the border or soft border
edge fill, you can combine color 1 and color 2.
For the combination, you can use not only a normal wipe
generator pattern, but also the dedicated color mix pattern.
1
In the <Edge Fill> group of the Edge/Direction menu,
Setting values
select [Matte], and press [Matte Adjust].
0.00 to 100.00
The Matte Adjust menu appears.
2
In the <Edge Matte> group, select [Mix Color],
Setting values
turning it on.
0.00 to 100.00
3
In the <Mix Pattern> group, make one of the following
selections.
Setting values
Wipe: Use the wipe pattern selected for the transition.
0.00 to 100.00
Pattern: Use the dedicated pattern.
0.00 to 100.00
4
Depending on the selection in step 3, set the following
parameters.
0.00 to 100.00
When Wipe is selected
Knob
1
2
When Pattern is selected
Knob
1
2
3
a) The patterns are the same as for a standard wipe. See "Wipe Pattern
List" (page 308).
If you selected Pattern, you can also carry out the
pattern selection by pressing the [Mix Ptn Select]
button in the Matte Adjust menu, to display the Mix
Ptn Select menu. Select any pattern appearing in the
Mix Ptn Select menu (wipe patterns 1 to 24) by
pressing the appropriate button, and you can then
adjust the following parameters.
Setting values
0.00 to 100.00
Knob
0.00 to 100.00
1
359.99 to 0.00
2
5
If you selected Pattern in step 4, if required, the
following modifiers can be added. After selecting a
wipe mix, skip to step 6.
Parameter Adjustment
Size Pattern size
Soft Edge softness
Parameter Adjustment
Size Pattern size
Soft Edge softness
Pattern Pattern number 1 to 24
Parameter Adjustment
Size Pattern size
Soft Edge softness
Basic Procedure for Wipe Settings
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
a)
Setting values
0.00 to 100.00
0.00 to 100.00
129