Recalling A Menu Macro Register And Executing A Menu Macro - Sony MVS-8000X User Manual

Recalling a Menu Macro Register
and Executing a Menu Macro
Menu macro operation is carried out by recalling a menu
macro register.
Notes
• Menu macros and macros recalled with a control panel
button operate independently. Therefore, to synchronize
these, adjustment of the execution timing is required.
• Events saved in a menu macro are executed according to
the settings in setup, and therefore if you change the
setup settings, it may not be possible to replay an event.
• When two menu macros are recalled successively, the
later coming macro is ignored as far as the first macro is
being executed.
Recalling a Menu Macro Register
1
In the Macro menu, select VF3 'Menu Macro
Register' and HF1 'Recall & Run.'
The Recall & Run menu appears.
Interval between events currently set
Selected event number / total number of events
Currently recalled register
Register number and name
L/E indication: "L" indicates "the register is
locked." "E" indicates an empty register.
Interval between events
Number of register selected on
the menu macro register list
Menu macro configuration list
2
Using any of the following methods, select the register
to be recalled.
• Press directly on the menu macro register list.
• Press the arrow keys on the right list to scroll the
reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Menu Register
Macro selection
Register
3
Press [Recall & Run x] or [Recall x] (x is the number
of the register selected in the menu macro register list).
• To execute the menu macro at the same time as
recalling the register, press [Recall & Run x].
• To recall the register only, press [Recall x].
Executing a menu macro
In the Macro >Menu Macro Register >Recall & Run
menu, check that you are not in macro editing mode, then
use the following procedure.
1
Using any of the following methods, specify the event
from which you want to execute.
• Press directly on the menu macro register
configuration list.
• Press the arrow keys on the right list to scroll the
reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
3 No Select start
event
2
Press [Run].
To stop execution of a macro
Press [Stop].
To move to the start of a menu macro event
Press [Rewind].
Recalling a menu macro register from a
macro register
Menu macro recall and execution operations can be saved
as events in a control panel macro, and then recalled.
If with the control panel in macro editing mode you
execute a menu macro, then this operation is recorded as
an event.
For details of recalling operations, use the following
references, depending on the control panel or menu used.
• Using the numeric keypad control block and the
keyframe control block: page 431
• Using menus: page 438
Setting values
1 to 99
Setting values
1 and upwards
445
Menu Macros