Mirror Settings; Multi Mirror Settings - Sony MVS-8000X User Manual

Parameter group [2/2]
Knob Parameter Adjustment
4 Width V Vertical width
of partition
5 Angle Angle of
partition line
To set the partition position
1
Press [Position], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment
1 H Horizontal
partition
position
2 V Vertical
partition
position
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9

Mirror Settings

You can choose to reflect in the directions left to right,
right to left, bottom to top, top to bottom, or any
combination of directions. You can also set the position of
the border between original and reflections.
To apply the Mirror effect
With the Mirror menu displayed, press [Left to Right],
[Right to Left], [Top to Bottom], or [Bottom to Top] to set
the reflection method (multiple selections possible).
Left to Right: Reflect left side on right.
Right to Left: Reflect right side on left.
Top to Bottom: Reflect top side on bottom.
Bottom to Top: Reflect bottom side on top.
Left to Right
To set the position of the border between original
and reflection
1
Press [Position].
2
Set the following parameters.
Setting values
0.00 to 100.00
–8.000 to
+8.000
Setting values
a)
–5.000 to +5.000
–20.000 to
b)
+20.000
a)
–5.000 to +5.000
–20.000 to
b)
+20.000
Top to Bottom
Knob Parameter Adjustment
1 H Horizontal
border
position
2 V Vertical
border
position
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9

Multi Mirror Settings

You can set the width of the original, the center position of
the original, the offset of the image with fixed mirrors, the
direction of the mirrors, and other parameters.
To apply the Multi Mirror effect
With the Multi Mirror menu displayed, set the following
parameters.
Knob Parameter Adjustment
1 Interval H Horizontal
distance
between
mirrors
(original width)
2 Offset H Amount of
horizontal
offset of image
with mirrors
fixed
3 Interval V Vertical
distance
between
mirrors
(original width)
4 Offset V Amount of
vertical offset
of image with
mirrors fixed
5 Angle Mirror angle
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To set the center position of original image
1
Press [Position], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment Setting values
1 H Horizontal
original
image
center
position
Applying Special Effects (Nonlinear Effect Settings)
Setting values
a)
–8.000 to +8.000
–32.000 to
b)
+32.000
a)
–6.000 to +6.000
–24.000 to
b)
+24.000
Setting values
a)
0.000 to 10.000
b)
0.000 to 40.000
a)
–4.000 to +4.000
–16.000 to
b)
+16.000
a)
0.000 to 10.000
b)
0.000 to 40.000
a)
–4.000 to +4.000
–16.000 to
b)
+16.000
–8.000 to +8.000
a)
–4.000 to +4.000
b)
–16.000 to +16.000
273