Sony MVS-8000X User Manual page 130

When turning [Position] on and setting the pattern
position
Knob Parameter Adjustment
1 Position H
2 Position V
a) See page 130.
When turning [Multi] on and using replications of
the same pattern
Knob Parameter Adjustment
1 H Multi
2 V Multi
3 Invert Type Replication
a) See page 132.
When turning [Aspect] on and setting the aspect
ratio of the pattern
Knob Parameter Adjustment
1 Aspect
a) See page 132.
When turning [Angle] on in the <Rotation> group
and slanting the pattern
Knob Parameter Adjustment
1 Angle
a) See page 131.
When turning [Speed] on in the <Rotation> group
and rotating the pattern at a constant rate
Knob Parameter Adjustment
1 Speed
a) See page 131.
6
To adjust color 1, set [Color 1] on, and to adjust color
2 set [Color 2] on, then adjust the parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
130
Basic Procedure for Wipe Settings
Setting values
Horizontal –200.00 to
a)
position +200.00
Vertical position –200.00 to
a)
+200.00
Setting values
Number of 1 to 63
repetitions of
pattern
horizontally
Number of 1 to 63
repetitions of
pattern
vertically
a)
1 to 4
layout
Setting values
Aspect ratio –100.00 to
a)
+100.00
Setting values
Angle of pattern –100.00 to
a)
rotation +100.00
Setting values
Rotation rate of –100.00 to
a)
pattern +100.00
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
Knob Parameter Adjustment
3 Hue Hue
7
To interchange color 1 and color 2, press the [Color
Invert] button, turning it on.
Setting the wipe position (Positioner)
When you turn on this function, you can move the wipe
pattern to any position.
Positioner Off
• The parameter H Position controls the horizontal
position of the pattern.
A negative value moves the pattern to the left, and a
positive value moves the pattern to the right.
• The parameter V Position controls the vertical position
of the pattern.
A negative value moves the pattern down, and a positive
value moves the pattern up.
You can set the position independently for the main pattern
and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
In the <Position> group, press [Position], turning it on,
and set the pattern position.
Knob Parameter Adjustment
1 Position H Horizontal
position
2 Position V Vertical position –200.00 to
To return the pattern position to the center of the
screen
In the <Position> group, press [Center].
To move the pattern from its current position to
the center through the course of a transition
In the <Position> group, press [Auto Center], turning it on.
To set the wipe position using the trackball
You can also set the wipe position using the trackball in the
device control block.
1
In the device control block, press the [M/E1] or [P/P]
button, turning it on.
Setting values
359.99 to 0.00
Positioner On
Setting values
–200.00 to
+200.00
+200.00