Masks - Sony MVS-8000X User Manual

5
To adjust the color, press [Zabton Color] and adjust
the following parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Density Density

Masks

There are two masks, which can be used to mask off
unneeded parts of a key or background, or to remove
defects, and these are known as the main mask and
subsidiary mask.
You can either use the main mask and subsidiary mask
independently, or at the same time.
Using the main mask
For example, to use the main mask for key 1 on the M/E-1
bank, use the following procedure.
1
In the M/E-1 >Key1 menu, select HF3 'Main Mask.'
The Main Mask menu appears.
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: signal from the dedicated box generator
Pattern: signal from the dedicated pattern generator
4
Set the mask source parameters.
When a box is selected
Knob Parameter Adjustment
1 Top Top position
2 Left Left position
3 Right Right position
4 Bottom Bottom position
5 Soft Box softness
When a pattern is selected
Knob Parameter Adjustment
1 Size Pattern size
Knob Parameter Adjustment
2
5
Setting values
a) The pattern is the same as a standard wipe. (See "Wipe Pattern List"
0.00 to 100.00
in Appendix (Volume 1) (page 308).)
0.00 to 100.00
To select the pattern, display the Mask Ptn Select
359.99 to 0.00
menu by pressing the [Mask Ptn Select] button in the
0.00 to 100.00
Main Mask menu.
After selecting one of the patterns (standard wipe
patterns 1 to 24) displayed in the Mask Ptn Select
menu, you can adjust the following parameters.
Knob Parameter Adjustment
1
2
5
To invert the black and white sense of the mask source,
press the [Mask Invert] button, turning it on.
6
When a pattern is selected as the mask source, set the
pattern modifiers as required.
When turning [Position] on and setting the pattern
position
Knob Parameter Adjustment
1
2
a) See page 130.
When turning [Multi] on and replicating the
pattern
Knob Parameter Adjustment
1
2
Setting values
–100.00 to
+100.00
3
–100.00 to
+100.00
a) See page 132.
–100.00 to
+100.00
When turning [Aspect] on and setting the aspect
ratio of the pattern
–100.00 to
+100.00
Knob Parameter Adjustment
0.00 to 100.00
1
a) See page 132.
Setting values
0.00 to 100.00
Soft Edge softness
Pattern Pattern number
Size Pattern size
Soft Edge softness
Position H Horizontal
position
Position V Vertical position
H Multi Number of
repetitions of
pattern
horizontally
V Multi Number of
repetitions of
pattern vertically
Invert Type Replication
layout
Aspect Aspect ratio
Key Adjustments (Menus)
Setting values
0.00 to 100.00
a)
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
–200.00 to
a)
+200.00
–200.00 to
a)
+200.00
Setting values
1 to 63
1 to 63
a)
1 to 4
Setting values
–100.00 to
a)
+100.00
103