Copying; Pause; Keyframe Loop (Repeated Execution Of A Specified Range) - Sony MVS-8000X User Manual

This inserts the keyframe you have moved after the
current keyframe. In constant duration mode, the
moved keyframe overwrites the edit point.
To insert the moved keyframe before a keyframe
Hold down the [SHIFT] button, and press the [PASTE]
button to insert the moved keyframe before the current
keyframe.

Copying

Copying keyframes
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect at the edit point you want to copy.
3
To copy a number of keyframes in a single operation,
press the [FROM TO] button, turning it on.
For how to specify a range of keyframes, see
"Modifying more than one keyframe simultaneously"
(page 393).
4
Press the [COPY] button.
This copies the specified keyframe, and saves it to the
paste buffer.
5
Move the edit point to the position where you want to
insert the copied keyframe.
6
Press the [PASTE] button.
This inserts the keyframe you have copied after the
current keyframe. In constant duration mode, the
copied keyframe overwrites the edit point.
To insert the copied keyframe before a keyframe
Hold down the [SHIFT] button, and press the [PASTE]
button to insert the copied keyframe before the current
keyframe.

Pause

To apply a pause to a keyframe, use the following
procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect on the keyframe to which you want to
apply a pause.
3
Press the [PAUSE] button.
Keyframe Loop (Repeated Execution
of a Specified Range)
By setting the range of the loop within the effect, and the
number of loop executions, you can execute the loop range
repeatedly.
Notes
It is only possible to set one keyframe loop for each region.
Creating a new keyframe loop
To specify the loop range and loop count, carry out the
following procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect on the keyframe you want to make the
first of the loop range (start point). (Here, by way of
example, keyframe 2 is taken as the start point.)
3
Press the [KF LOOP] button in the keyframe control
block, turning it on.
The numeric keypad control block display shows the
start point keyframe number as follows.
FM 2 TO
The example shown means "from (keyframe) 2 to...,"
where the end keyframe is to follow.
4
With the numeric keypad buttons of the numeric
keypad control block, enter the number of the last
keyframe in the loop range (end point). (Here, by way
of example, keyframe 5 is the end point.)
FM 2 TO 5
5
Press the [ENTER] button to confirm the entry.
The display changes as follows, prompting you to
enter the loop count.
COUNT
6
Enter the loop count. (Here, by way of example, "15"
is entered.)
• To specify a loop count, enter a number in the range
1 to 99.
• To specify an endless loop, enter "0" (zero).
COUNT 15
7
Press the [ENTER] button to confirm the entry.
Creating and Editing Keyframes
395