Spot Color Adjustment - Sony MVS-8000X User Manual

Knob Parameter Adjustment
1 Over B Degree of
Soft softness at
Over Bright
point
2 Mid B Soft Degree of
softness at
Bright/Middle
point
3 Dark Mid Degree of
Soft softness at
Middle/Dark
point
4 Under D Degree of
Soft softness at
Under Dark
point
5
In the <Luminance Process Adjust> group, press
[Dark], [Mid], or [Bright], and adjust the following
parameters for the three regions.
In tint mode
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
In color modify mode
Knob Parameter Adjustment
1 Luminance Luminance
2 C Gain Chrominanc
e signal gain
3 Hue Delay Hue delay
To return the parameters to their default settings
In the <Luminance Process> group, press [Unity].

Spot Color Adjustment

You can change the color of a specified color region to a
different color, without affecting other regions. You can
also mask part of such a region.
Then for the region other than the region whose color you
have changed, you can make the following corrections.
• Video signal overall gain adjustment
• Y signal gain adjustment
• Y signal offset adjustment
• C signal gain adjustment
• C signal hue adjustment
Adjusting the color of the specified region
Setting values
(key)
15.00 to 70.00
1
15.00 to 42.50
2
15.00 to 42.50
3
15.00 to 70.00
4
Setting values
–100.00 to +100.00
0.00 to 100.00
359.99 to 0.00
Setting values
–100.00 to +100.00
5
0.00 to 200.00
–180.00 to +180.00
6
7
In the CCR menu, press VF1 'CCR1' and HF6 'Spot
CCR/Output.'
The Spot CCR/Output menu appears.
In the <Spot CCR> group, press [Spot CCR], turning
it on.
In the <Auto> group, press [Sample Mark], turning it
on.
Notes
When [Sample Mark] is on, the effects of color
adjustment outside the region of spot color adjustment
(see page 200) and output video processing (see page
200) are temporarily disabled.
Turning [Sample Mark] off restores the former state.
Adjust the parameters so that the color you want to
change is included within the sample mark.
Knob Parameter Adjustment
1 Position H Horizontal
position
2 Position V Vertical
position
3 Size Size
In the <Auto> group, press [Auto Start], to adjust the
key automatically.
Notes
This automatic adjustment does not carry out key gain
adjustment. If required, adjust the key gain as shown
in step 6.
Press [Key Adjust], and adjust the following
parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Gain Key gain
Press [Window], turning it on, to adjust the key
detection range for spot color adjustment.
Knob Parameter Adjustment
1 Luminance Luminance
Setting values
–100.00 to +100.00
–100.00 to +100.00
1.00 to 100.00
Setting values
–7.31 to +109.59
0.00 to 100.00
359.99 to 0.00
–100.00 to +100.00
Setting values
0.00 to 100.00
199
Color Corrector Functions