Sony MVS-8000X User Manual page 283

Notes
• "Rainbow," "Mix Color," and "Ext Video" are not
supported on the MVE-8000A.
• "Mix Color" or "Ext Video" can only be applied to one
of the background (see page 295), flex shadow (see page
247), trail, and wind (see page 286) effects.
If you select "Mix Color" or "Ext Video" in one of these
settings, a selection of "Mix Color" or "Ext Video" in
any of the other effects is disabled, and "Flat Color" is
selected in its place.
• When executing combining four channels of DME
images, "Mix Color" and "Ext Video" in the flex shadow
and background effects cannot be selected.
Freeze Video: Use freeze images of the input video as
source of the trail.
Flat Color: Use a flat color matte as source of the trail.
You can set the following parameters with the knobs.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
Hue Rotate: Use a color matte whose hue varies slightly
with each frame for the trail of the afterimages. You
can set the following parameters with the knobs.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Speed at
Speed which the
hue changes
Mix Color: Insert a mix color signal set in the Color Mix
menu (see page 253) in the afterimage portion.
Ext Video: Insert the external video signal input to the Ext
IN connector in the afterimage portion.
Rainbow: Use a freeze image with the hue changing every
frame in the afterimage portion. The difference from
"Hue Rotate" is that many colors appear
simultaneously.
For details of the Rainbow parameters, see the "Hue
Rotate" item above.
Erasing the afterimages that remain in
memory whenever a keyframe is passed
Press [Trail Eraser], turning it on.
When the effect passes a keyframe, the afterimage is
erased before writing a new afterimage.
Selecting the freeze timing
In the <Trail Freeze Timing> group, select the timing for
freezing a trail.
Frame: freeze in frame units.
Field: freeze in field units.
Notes
The freeze timing setting is not required when the
following signal formats are being used.
Defocusing the afterimage portion
(Defocus)
Notes
The function to defocus the trail afterimage portion is not
Setting values
supported on the MVE-8000A.
0.00 to 100.00
0.00 to 100.00
1
359.99 to 0.00
2
Setting values
0.00 to 100.00
0.00 to 100.00
–12.00 to +12.00
Applying stardust to the afterimage
portion
The afterimage portion becomes stardust, and gradually
disappears.
1
2
Signal formats: 1080P/50, 1080P/59.94, 1080PsF/
23.976,1080PsF/24, 1080PsF/25, 1080PsF/29.97,
720P/50, 720P/59.94
Press [Defocus], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Defocus V Defocusing
of the video
signal
2 Defocus K Defocusing
of the key
signal
Press the [DUST] button, turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Trail Dust Amount of
the
afterimage
disappearing
as stardust
2 Dust Soft Timing with
which
stardust
disappears
3 Dust Size Size of
stardust
Applying Special Effects (Lighting and Recursive Effects)
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
a)
0.00 to 100.00
0.00 to 100.00
283