Nega Settings; Contrast Settings; Mosaic Settings; Sketch Settings - Sony MVS-8000X User Manual

Masking the Posterization or Solarization
effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).

Nega Settings

Applying the Nega effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Nega Y] or [Nega C], turning it on, or press both
buttons, turning them on.
Nega Y: Reverse the luminance.
Nega C: Reverse the chroma.
Masking the Nega effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).

Contrast Settings

Applying the Contrast effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Contrast], turning it on.
3
Set the parameters.
Knob Parameter Adjustment
1 Y Clip
2 Y Gain
3 Y Offset
4 C Gain
258
Applying Special Effects (Effects on the Overall Video Signal)
Setting values
Luminance +109.59 to –7.31
clip level
Luminance –100.00 to +100.00
contrast
gradient
Luminance –100.00 to +100.00
offset level
increment
Chroma –100.00 to +100.00
contrast
gradient
Video output level
Video input level
Clip, Gain, Offset
Masking the Contrast effect with a
selected pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).

Mosaic Settings

Applying the Mosaic effect
1
In the DME menu, select VF2 'Video Modify' and
HF4 'Mosaic.'
The Mosaic menu appears.
2
Press [Mosaic], turning it on.
3
Set the following parameters.
Knob Parameter Adjustment
1 Size Size of tiles
2 Aspect Aspect ratio
of tiles
a) Specify minus values to stretch the tiles in the vertical direction, and
plus values to stretch the tiles in the horizontal direction.
Masking the Mosaic effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).

Sketch Settings

Applying the Sketch effect
1
In the DME menu, select VF7 'Enhanced Video
Modify' and HF1 'Sketch.'
The Sketch menu appears.
2
Press [Sketch], turning it on.
Video output level
Video input level
Setting values
0.00 to 100.00
–100.00 to
a)
+100.00