Sony MVS-8000X User Manual page 478

BZS-7560X
a) This is used for license registration common to the MVS-7000 and the
MKS-7470X/7471X.
b) This is used for license registration required to support multiple signal
formats when two MKS-7210X boards are used.
c) This is used for license registration required to support multiple signal
formats when three MKS-7210X boards are used.
d) This is used for license registration required to support multiple signal
formats on the MKS-7470X.
e) This is used for license registration required to support multiple signal
formats on the MKS-7471X.
f) This can be used only on MVE-8000A.
g) This can be used only on MVE-9000.
To display the unique device ID
1
In the System >Install/Unit Config menu, use either of
the following methods to select the device for which
you want to register the license.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
2
Press [License].
The License menu appears as follows.
Device name
List of software option model names and numbers
Entering the install key
When you have the install key, carry out the following
procedure.
1
In the System >Install/Unit Config menu, use either of
the following methods to select the device for which
you want to register the license.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
478
Installation and Device Setup (Install/Unit Config Menu)
Switcher Upgrade Software
Unique device ID
Whether or not software licensed
2
Press [License].
The License menu appears.
3
Press directly on the name of the software you want to
license (the Condition box is blank).
4
Press [License Management].
The License Management menu appears.
5
Press [Activate License].
A keyboard window appears.
6
Enter the 16-character install key you have been given,
and press [Enter].
A license registration completed message appears.
7
Press [OK].
The status area Condition box shows "Active."
8
Using either of the following methods, restart the
device.
• In the System >Initialize menu, with only the device
for which you registered the license being selected,
press [Reset] in the <Initialize> group and then press
[Execute].
• Power off and on again.
After restarting, the licensed software is now available
for use.
(In case it becomes necessary to cancel the license
registration, you can use the following procedure.)
To cancel the license registration
1
In the System >Install/Unit Config menu, use either of
the following methods to select the device for which
you want to cancel the license registration.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
2
Press [License].
The License menu appears.
3
Press directly on the name of the software for which
you want to cancel the license registration (the
Condition box shows "Active").
4
Press [License Management].
The License Management menu appears.
5
Press [Deactivate License].